Baseboard Management Controller (BMC) QLogic Zircon
BMC ARM7 technology core Protocols and Standards
Tailored for IPMI 1.5 compliance Remote
Management and Control Protocol (RMCP) for IPMI-Over-LAN Alert Standard Forum (ASF)
Primary Communication Interface Keyboard Controller Style (KCS) Block Transfer (BT)
Auxiliary Communication Interface Intelligent Platform Management Bus (IPMB) Emergency Management Port
(EMP) Local Area Network (LAN)
Auxiliary SMBus / I2C buses 4 dedicated and independent buses
available for user expansion
Sensor Monitoring Voltage Temperature
Tachometers Fan Speed Control / PWM Chassis Intrusion Field Replaceable Unit (FRU)
Chassis, motherboard, product, and other information stored and secured in FRU
Real Time Clock (RTC)
RTC kept in sync with system RTC for synchronized scheduling and logging
Form Factor 4.6" x
2.4" (116.84mm x 60.96mm) Low profile PCI form factor tailored to allow different mounting varieties
- Fits on PCI slot - Fits in 3.5" drive bay - Fits inside almost
any chassis *
*
requires special mounting holes. |
|
Control Command Set Power Up / Power Down
System Reset System Power Cycle System NMI Diagnostic Command Set
Power-Good Detection CPU Voltage Identification (VID) ACPI State Detection
Request Message Redirection through IPMB Sensor Data Repository (SDR)
Detailed sensor information, including sensor
types and measuring units System Event Log (SEL) Complete history of system events, such as POST
events, are stored in non-volatile memory Card Interface
Proprietary 50-pin interface
(2x25 header, 2mm x 2mm) Additional Features Firmware-upgradeable through flash utility
Front Panel LED and Buzzer interface/control
Emergency Management Port (EMP) Console
Serial port interface provides access VT100 emulation capability - Event Log Viewer and Maintenance
- FRU Viewer - SDR Viewer - Sensor Reading Viewer
- BMC firmware/IPMI controller firmware info. - System Power On / Off
- System/BMC Reset |
|